CDS6150B/CDS6250B China Machine Conventional lathe Engine Lathe Manual Machine Metal Lathe
Main Features
1. The machine body is casted with high-strength cast iron, and the guide rail of the machine bed adopts a mountain-shaped and flat guide rail layout.
Large load-bearing section, therefore, has good rigidity and shock absorption, which can ensure high-precision cutting.
2. The mechanical friction plate clutch is used in the main shaft box of the machine tool: through the control lever, there is no need to change the speed of the motor
And stop the motor can realize the spindle speed change, stop, reversing, and the spindle box is forced to lubricate.
3. High-rigidity mechanical tool holder with high reliability.
Product Configuration
| Product model |
UNIT |
CDS6150B |
CDS6250B |
CDS6156B |
CDS6256B |
CDS6166B |
CDS6266B |
| specification |
| Max. swing diameter over bed |
mm |
Ø500 |
Ø560 |
Ø660 |
| Max.swing diameter over cross slide |
mm |
Ø290 |
Ø350 |
Ø440 |
| Max.swing diameter in gap |
mm |
— |
Ø760 |
— |
Ø800 |
— |
Ø870 |
| Length in gap |
mm |
— |
280 |
— |
280 |
— |
280 |
| Max. workpiece length |
mm |
750/1000/1500/2000/3000 |
| Max. cutting length |
mm |
700/950/1450/1950/2950 |
| Spindle |
| spindle nose |
|
D8 |
| Spindle bore |
mm |
Ø82(Allowable bar diameter≤Ø80) |
| Chuck size |
mm |
Ø250 |
Ø315 |
| Taper of spindle bore |
|
90 mm/1:20 |
| Max.Spindle torque |
Nm |
1100 |
| Spindle speed ranges |
rpm |
26-2000(16 speeds) |
| Spindle centre height |
mm |
250 |
280 |
325 |
| Spindle motor power |
kW |
7.5(10 HP) |
| Tailstock |
| Diameter of tailstock quill |
mm |
Ø75 |
| Travel of tailstock quill |
mm |
150 |
| Taper of tailstock quill |
|
No.5 MT |
| Feeds&Threads (metric screw *inch screw) |
| Longitudinal feed |
|
0.044-1.48 mm/rpm (45 Kinds) *0.044〜0.148 in/rpm (45 Kinds) |
| Cross feed |
|
0.022~0.74mm/rpm (45 Kinds) *0.031-0.092 in/rpm (45 Kinds) |
| Metric threads |
mm |
0.5-80 (73 Kinds *53 Kinds) |
| Modular threads |
mm |
0.5-40 (45 Kinds *66 Kinds) |
| Inch threads |
TPI |
7/16-80 (47 Kinds *47 Kinds) |
| Diametral pitch threads |
DP |
7/8~160 (47 Kinds *48 Kinds) |
| Tool post |
| Max.tool shank size |
mm |
25X25 |
| Travel of top slide |
mm |
150 |
machine dimensions
(L*W*H) |
mm |
2680X1223X1295 (750) 2930X1223X1295 (1000) 3430X1223X1295 (1500) 3930X1223X1295 (2000) 4930X1223X1295 (3000) |
2680X1223X1325 (750)
2930X1223X1325 (1000)
3430X1223X1325 (1500) 3930X1223X1325 (2000) 4930X1223X1325 (3000) |
2680X1223X1370 (750)
2930X1223X1370 (1000) 3430X1223X1370 (1500) 3930X1223X1370 (2000) 4930X1223X1370 (3000) |
| Machine weight |
kg |
2120/2170/2420/2620/3120 |
2180/2270/2480/2680/3180 |
2400/2500/2700/2900/3400 |
